Installing Fiery API Install or upgrade the Fiery API component of your Fiery server through Fiery Integration Manager.

Fiery system software updates and patches. To access Fiery Updates, start Command WorkStation. The computer running Command WorkStation must: Be connected to the Internet Be on the same network as the Fiery server Updates and patches can be installed onto the Fiery server from only one computer at a time. System Updates must be disabled to allow patches to be installed.

1 Installing or Updating Fiery System Software This document explains how to install or update system software on the Fiery Network Controller for DocuColor 240/250. NOTE: The term Fiery is used in this document to refer to the Fiery Network Controller for DocuColor 240/250. The term copier is used to refer to the DocuColor 240/250. Fiery System Installer, located on the System Software CDs, offers two methods of installing system software: Direct Installation Allows you to reinstall system software directly through a crossover Ethernet cable connected between the Fiery and a Windows computer.

This method is for use by authorized service technicians only. Network Installation Allows you to update system software on the Fiery through a remote network connection. Using Direct Installation (for service technicians only) NOTE: The Direct Installation method allows service technicians to reinstall system software on the Fiery for service or troubleshooting purposes.

If you are not an authorized service technician, do not attempt to use Direct Installation; use Network Installation instead (see page 3). TO REINSTALL SYSTEM SOFTWARE USING DIRECT INSTALLATION 1. Make sure that you have a Windows XP/2000 PC equipped with the necessary system requirements. For more information on system requirements, see the section Installing system software over the network port in the Installation and Service Guide for the Fiery. Do the following (for more information, contact your system administrator): Close all software applications that may be running on the PC. Stop all File Transfer Protocol (FTP) and Trivial File Transfer Protocol (TFTP) services that may be running on the PC.

Disable any virus scan programs that may be running on the PC. Remove any network cables between the PC and the customer network. Disable any wireless network connections on the PC. Copyright 2007 Electronics for Imaging, Inc. Part Number: November 8, 2007. Follow steps 1 through 5 of the procedure To install system software over the network port in the Installation and Service Guide.

After that, you can wash these pads with clean water. Wic reset key generator. If your printer has a panel underneath, then you can take the pads out easily. As these pads are located at the base of the printer, it is very difficult for you to replace it by yourself. Do not use any chemicals on these Waste Ink Pads! Secondly, you can continue to use the old pads by washing them.

Power on the PC and insert System Software CD 1 into the PC media drive. Wait for the Fiery System Installer screen to appear. NOTE: If the installer does not launch automatically, open the CD folder and double-click Installer.vbs. If another window opens in front of the Fiery System Installer screen, close the window. Click Direct Installation. Continue with the remaining steps of To install system software over the network port in the Installation and Service Guide, starting from step 7. When prompted by the installer, insert System Software CD 2 and then CD 3.

2 3 Using Network Installation Network Installation allows you to update the Fiery to the latest version of system software. NOTE: If you need to reinstall the same version of Fiery system software for service or troubleshooting purposes, do not use Network Installation. Contact your authorized service technician and ask the technician to reinstall system software using Direct Installation. Before you update system software Keep in mind the following when updating system software: Remote users Before you begin the update, notify all users that a remote installation is in progress. Caution users against interacting or powering off the Fiery(s) or copier(s) during the installation.

If a user interacts with a Fiery or copier during the installation, the update on that Fiery will fail. Fonts Updating system software deletes all fonts that you have installed on the Fiery. Only resident fonts will be restored during system software installation. Command WorkStation can be used to reinstall additional fonts.

To determine which additional fonts have been installed on the Fiery, print the Fonts List before you start the system software update and again after you complete the update. Any fonts not listed after the update will need to be reinstalled. For information about how to print the Fonts List, see Utilities on the User Documentation CD. Custom simulation and output profiles Custom simulation and output profiles saved on the Fiery are deleted when you update system software. Be sure to save copies of any custom profiles before you start the update. Language Screens for installing system software are always displayed in English, even if the Fiery is configured for another language. Compatibility The latest user software must be installed onto all computers that print to the Fiery.